01
Front brake upgrade · RMA Automotive
Heavy-Duty Brake Kit
6-piston caliper | 332 mm rotor
A complete braking upgrade engineered to deliver stronger stopping performance, improved stability and extended service life under demanding driving conditions.
60%
Less pedal effort
2m
Shorter stops from 80 km/h
Direct bolt-on installation
02
Specifications
Main kit components, built for heavy loads

Friction coefficient
FG 0.40–0.42

Operating temperature
100–300 °C

Warranty
24 months / 40,000 km
Caliper
6-piston
Aluminium, high rigidity
Rotor
332 mm
Slotted, high-carbon alloy
Rotor size
332 × 32 × 58 mm
Diameter × thickness × height
Brake pads
Kevlar Ceramic
Consistent friction, low noise, reduced dust
Hoses
Braided
Stainless steel
Installation
Direct bolt-on
Instructions provided
Wheels
17 in and up
Check clearance with the supplied template
Factory systems
Compatible
Electronic braking & stability systems
03
Key highlights
Stronger stopping, consistent under load
Stopping power
- Six-piston aluminium caliper construction
- 332 mm performance brake rotors
- Increased brake pad contact area
Friction & lines
- Kevlar Ceramic brake pads
- Stainless-steel braided brake hoses
Fit & finish
- Direct bolt-on installation
- Compatible with suitable 17-inch wheels

Six-piston aluminium caliper
High-rigidity construction with a baked high-temperature paint finish, oven cured as part of the caliper production process.

Increased pad contact area
Better load distribution and heat management, so braking stays consistent under heavy loads and repeated stops.

332 mm slotted rotors
High-carbon alloy rotors, 32 mm thick, for wheels from 17 inches up.
04
Proven performance
Rockline vs OEM
Comparative brake testing against the OEM brakes on a Next-Generation Ford Ranger, from approx. 80 km/h.
60%
Less pedal effort
The same emergency stop with less than half the foot pressure: about 19 kg instead of 48 kg.
OEM
approx. 48 kg
ROCKLINE
approx. 19 kg
2 m
Shorter stops
From 80 km/h the vehicle stops about 2 metres shorter, roughly half a car length.
OEM
30.4 m
ROCKLINE
28.5 m
| Test data | OEM | Rockline |
|---|---|---|
| Average pedal effort | 472 N | 187 N |
| Peak pedal effort | 579 N | 249 N |
| Test data | OEM | Rockline |
|---|---|---|
| Average deceleration | 8.49 m/s² | 9.06 m/s² |
| Stopping distance | 30.43 m | 28.46 m |
Test conditions
Comparative test vs OEM brakes, Next-Generation Ford Ranger at approx. 80 km/h. Results are specific to the tested vehicle and test conditions.
05
Fitment & warranty
Bolts on to your Ford
Made for the current Ranger and Everest. Send us your model, year and wheel size and we’ll confirm fitment.
Ford
Ranger*
PY 2022
Ford
Everest
UB 2022
* Fitment note
Excludes Ford Ranger XL / XLS models with rear drum brakes. Fits 17-inch wheels and up; check clearance with the supplied template before ordering.
Wheels & installation
- Fits 17-inch wheels and up; check clearance with the supplied template
- Direct bolt-on, instructions included
- ADR-related tested; works with factory electronic braking and stability systems when correctly installed
Warranty
- 24 months / 40,000 km, including towing within the vehicle’s rated capacity and normal off-road use
- Excludes damage from water crossings, mud or grit
- 5-tonne payload limit applies to the vehicle, not the trailer. Full terms apply.
Ready to stop shorter?
Heavy-duty brake kit · Front brake upgrade
Tell us your vehicle, model year and wheel size. Our team will confirm fitment and come back with a quote.